- High-tech engineering team undertaking an ambitious clean-up operation of dirty buses and coaches currently in use in major cities
- Part of Saietta Group Plc, the RetroMotion division offers bus and coach operators effective and tailored propulsion solutions that can transform any fleet into an eco-friendly and sustainable mobility service
- Electric powertrain conversion eliminates local harmful diesel-engine emissions and dramatically cuts road noise pollution in urban areas
- Real-world zero-emissions driving range of 350kms possible
- RetroMotion vehicles already running in Europe, proving reliability and durability credentials of the technology in everyday use
- Driver and passengers experience a quieter, smoother and comfortable ride
- Saietta Group and RetroMotion primed and ready to electrify transport services so that cities become cleaner, greener and quieter spaces
- All-new and interactive website goes live: www.saietta-europe.com
Oxfordshire, UK, / Apeldoorn, Netherlands, 7 March 2022 – SAIETTA Group plc (Saietta), specialists in high-tech advanced e-mobility propulsion, is intensifying an important overhaul operation to transform existing high polluting diesel-engine-powered buses and coaches into clean, sustainable and zero-emission vehicles.
Through its RetroMotion division, Saietta is equipped with the technical expertise, engineering experience and state-of-the-art propulsion systems and software to offer fleet operators an economical, effective and optimal solution to ‘electrify’ existing buses and coaches.
By working with the RetroMotion engineering team, bus and coach service providers can revitalise their aging, polluting diesel-based fleet to a retrofit propulsion solution that is modern, all-electric, clean, silent-running and sustainable.
A real-world zero-emissions driving range of up to 350kms is possible with the all-electric retrofit powertrain, depending on individual specification, application and vehicle size.
RetroMotion’s ambitious strategy is part of Saietta’s wider plans to ensure densely populated city centres become cleaner, greener and quieter living spaces.
“Saietta Group prides itself on being at the vanguard of e-mobility propulsion with the aim of democratizing clean sustainable transportation around the globe and within every sector, from two-wheel scooters to compact passenger cars and right through to bus, coach and heavy goods vehicles,” said Wicher Kist, chief executive officer at Saietta.
“But we also understand that such important yet dramatic change – effectively replacing outdated internal combustion engines (ICEs) with new battery electric powertrains – can’t be successfully achieved overnight. That’s why we are stepping up the efforts of our RetroMotion engineering division. We want to give coach and bus operators an opportunity to transform their aging and polluting fleet into a green mobility service that’s modern and clean.
“RetroMotion’s services mean fleet operators don’t have to make sudden and huge outlays on all-new electric vehicles. These important investments can be done incrementally thanks to the possibility of upgrading and extending the lifespan of existing buses and coaches, in the process also meeting upcoming tough legislation.”
RetroMotion’s expertise in this area spans nearly two decades from the point at which the organisation first saw a need from the market for this tech solution, with a detailed research and development program being implemented thereafter.
Delivery of the company’s first-gen e-axles to customers commenced in 2009. Since then, RetroMotion has developed a high-tech second-generation e-axle and e-powertrain solution. In real-world bus applications running in European cities, the RetroMotion electrification tech package – both gen-one and gen-two developments – has proved impressive reliability and durability attributes, having accumulated in total 3.2 million kilometres on-road usage so far.
RetroMotion in action
The engineering team at RetroMotion offers an optimal and complete one-stop-shop retrofit package for existing diesel-powered coaches and buses.
The service is seamless, combining mechanical, electrical and software integration with an advanced drivetrain that has been developed and packaged in-house by the RetroMotion team.
The powertrain conversion replaces the aging diesel ICE and all its associated components, including the gearbox, with an advanced e-propulsion system. This means that state-of-the-art, in-wheel electric motor technology is applied to the rear wheels of the coach or bus. Unlike other systems available on the market, RetroMotion’s solution is a true in-wheel arrangement and not ‘near-wheel’.
A twin-tire solution with front mounted rims is used as part of the re-design to ensure the in-wheel motors fit seamlessly to the existing application. Critical systems such as the high-power inverter and motor components like the stator and rotor with permanent magnets are also installed as part of the transformation.
The electric motors and e-platform, branded TheWheel and TheMotion 2.0, have been designed in-house to be a class leading solution. Peak torque of up to 20,000Nm is possible with a 94% real-world efficiency level being realized from battery to wheel.
The elimination of a gearbox that was once mated to the diesel ICE means that in the new all-electric powertrain setup, no energy is consumed by having to go through the gears or using a differential, further boosting real-world efficiency.
The Lithium-iron Phosphate (LFP) battery pack is available in a range of power outputs to suit differing requirements, varying from 181kWh to 422kWh. The transformation from an aging diesel-powered coach or bus to a modern all-electric mobility vehicle also sees the integration of Saietta’s vehicle energy manager and body control module systems; Saietta’s high-voltage power distribution unit; a battery management system and battery thermal management system; high-voltage inverters; and auxiliaries such as air compressors and the power steering system that has been upgraded to be electrically operated.
The RetroMotion team also installs a charging communication ECU; a charging system and CCS charging socket.
With the electric motors being an in-wheel setup, and the battery pack having been designed to meet optimum dimensions, the all-electric powertrain is compact and benefits from an ideal operating footprint size and weight in comparison to the diesel ICE and its associated subsystems, meaning that both passenger and luggage capacity are minimally affected by the switchover.
A new visually engaging driver display unit has also been designed to further facilitate the transformation to all-electric operation, providing the driver with clear and coherent data relating to the drivetrain, including real-time battery status. The driver display unit is available in three sizes: 5-, 7- or 10-inch displays.
Technology with added benefits
In addition to the primary benefit of powering a coach or bus with a high-tech, all-electric and zero-emissions powertrain, the RetroMotion engineering transformation also dramatically cuts road noise pollution with the elimination of rumbly, aging and polluting diesel ICEs.
On the inside of the vehicle, the journey experience is substantially enhanced thanks to the silent drivetrain operation, meaning that passengers have increased comfort and the driver benefits from a cabin that isn’t exposed to high noise, vibration and harshness levels.
About Saietta Group
Saietta Group plc is an engineering business specialising in the design, development and supply of complete powertrains for electric vehicles (EVs) from scooters to buses as well as marine applications.
Saietta has engineered breakthrough electric motor technology including proprietary AFT (Axial Flux Technology) and RFT (Radial Flux Technology) which is mated to controllers and transmissions. The design is unique and modular, enabling the delivery of high and low voltage e-motor solutions.
Saietta’s difference lies in two areas. Firstly, its ability to conceive powertrain solutions tailored to deliver competitive advantage; and secondly, it provides turnkey engineering services to electric vehicle manufacturers to take them to start of production faster.
Services include market research and product definition, CAE and simulation, motor-controller electrical and mechanical integration, prototype build and rigorous testing on rigs and 20 miles of private roads. Saietta can go further still, defining the high-volume production processes for clients to manufacture in their local markets.
More information is available via the Saietta Group website (www.saiettagroup.com). The company can also be found on LinkedIn and Twitter.
For further information on Saietta Group, images, or comment, contact PFPR Communications:
M : +44 (0) 7725 257 792
E : firstname.lastname@example.org
M : +44 (0) 7759 858 688
E : Dean.Borge-Slavnich@pfpr.com